Operating instructions

57
In this way you can prepare 6 x 2 = 12 beverages in
succession by using quantity selection and pressing one of
the beverage keys twice (two cup function).
Press the key to select the required number of repeats,
for example: 6 x . The following display appears:
Ready
Pre-sel 06
11:21
20.04.
Press the desired beverage key, e.g. Café Crème twice
quickly in succession (two cups).
2 Café Crème
Pre-sel 06
11:21
20.04.
Six brewing cycles are now performed one after the other.
When brewing is complete, the display again shows:
Ready
Pre-sel 01
11:21
20.04.
Remember to place a fresh cup under the combination
spout 6 in time. The quantity selected can be altered while
brewing is in progress by pressing the - or keys.
7.6 Hot water dispensing
Caution!
Scalding hazard in the vicinity of the hot water
spout 12.
Hot water can be dispensed in three different ways via the
hot water spout 12:
Measured quantities:
Dispensing starts automatically when the hot water key 11
is pressed and stops automatically after a predefined
quantity has been dispensed.
Start-stop function:
Pressing the hot water key 11 starts the dispensing process
and pressing it again stops it.
Free flow:
Dispensing continues for as long as the hot water key 11 is
pressed.
The preferred mode is set by your WMF customer service
personnel, according to your requirements.
Note: It is not possible to dispense hot water and
coffee at the same time.
12