Operating instructions

56
7.5.3 Manual input
The machine is equipped with a manual input 2 for ground
coffee to prepare additional coffee beverages (e.g. mild
coffee or decaffeinated coffee). To use the manual input,
proceed as follows:
1. Open the manual input 2. The coffee grinders 1 are
now switched off.
The following message appears in the display::
Insert ground coffee
Press button!
2. Insert in the appropriate quantity of ground coffee for
the brewing quantity required, using the measuring
spoon (order no. 33 0742 4000) (max. 20g).
The following request appears in the display:
Please close
input opening!
3. Close the manual input 2 and press the appropriate
beverage key 4. The desired beverage will now be
prepared from the ground coffee. Quantity selection
(see chapter 7.5.4 Quantity selection on page 56) is not
possible in this mode.
4. At the end of the brewing process the freshly prepared
coffee beverage is ready.
The used coffee grouts are collected in the built-in
coffee grouts container 13.
5. If no beverage keys are pressed within 20 seconds of
opening the manual input 2, the ground coffee that was
Ready
Pre-sel 01
11:21
20.04.
inserted, is ejected into the grouts container and the
machine is ready for operation again.
7.5.4 Quantity selection
If you wish to prepare several cups in sequence, you can
have every key repeat automatically up to 6 times: