Operating instructions

52
It is important to refill the coffee beans hopper 1 before it
is completely empty, to ensure correct operation of the
coffee machine.
Special version (‘empty’ message):
A display 8 requests you to refill the coffee beans hopper 1.
Refill
coffee beans left!
Coffee dispensing is disabled when the coffee beans
hopper 1 is empty.
Refill
coffee beans right!
Simply refill the hopper with coffee beans and the message
will disappear.
7.3 Preparing to dispense milk
In order to dispense coffee beverages with milk from the
machine, the milk container (e.g. the Tetra Pak as shown
here) has to be connected to the combination spout 6 of the
machine by the milk intake hose.
If this is not the case, proceed as follows:
The milk intake hose has a plastic connector on one end
(bottom left in the picture) and a metal nozzle on the other
end (top right in the picture).
Insert the connector of the milk intake hose into the
connection provided on the underside of the combination
spout 6. Then push the milk intake hose into the guide on
the underside of the combination spout 6, to fasten the milk
intake hose to the combination spout 6.
6