User manual

55
User Manual WMF8000S
Care | Manual cleaning
4.5.10 Clean powder hopper
Cleaning will be more frequent depending on powder
consumption.
 Slide the operating panel upward
The ON/OFF switch is on the right side, behind the
operating panel.
 Press the ON/OFF switch until coffee machine switches
off
 Disconnect mains plug
 Use the multitool to turn the lock on the powder hopper
counterclockwise to open it
 Tip hopper backwards and remove upwards
 Empty hopper completely
 Unscrew union nut at front and rear
 Remove the dosing auger
 Thoroughly wipe out hopper with adamp cloth
 Thoroughly clean individual dosing auger components
 Allow powder hopper and individual components to dry
completely
 Re-assemble and replace the dosing auger and screw on
union nuts
Ensure correct orientation of discharge.
 Refill and replace powder hopper
 Use the multitool to rotate the lock clockwise to close it
Portion controller with individual
parts. Dosing auger
IMPORTANT