User manual

53
User Manual WMF8000S
Care | Manual cleaning
4.5.8 Clean the mixer
Cleaning will be more frequent depending on powder
consumption.
Slide the operating panel upward
Pull off mixer hose from mixer to combi spout
Turn the green stud on the bayonet connector
underneath the mixer bowl counter-clockwise to open
Mixer bowl is released from the retaining catch.
The propeller for the mixer is now visible.
The propeller can be cleaned with acloth
Dismantle two-piece mixer bowl
Clean both parts of mixer bowl and mixer hose under
warm running drinking water
Allow all parts to dry completely
On re-assembly, all openings must face in the same
direction.
Replace mixer bowl
Close the green stud on the bayonet connector
clockwise to close it
Push mixer hose onto mixer bowl fitting again, and plug
in combi spout
Scalding hazard
• If the mixer hose is not firmly attached,
hot water or hot powder beverage can be
discharged inadvertently
> Always firmly attach the mixer hose
Instructions as animation
w Coffee machine
w Main menu
w Care
w Instructions
CAUTION
Observe the Safety chapter
w starting on page 63