User manual
38
User Manual WMF8000S
Software | System
3.11 System
Milk and foam
The central generic values for milk and milk foam are set
here. These values apply to all existing recipes.
If special values for milk and milk foam are set in the
recipes, they retain their validity and are not modified.
Milk storage temperature
The milk storage temperature is entered here.
When using Cup&Cool, it is <8°C, for example.
Hot foam proportion
Options: very little, little, average, much, very much.
Default value: little
Cold foam proportion
Options: very little, little, average, much, very much.
Default value: much
Illumination
The illumination color is set here.
Set the desired color via the triangle in the color wheel.
The color can also be defined and set by means of RGB
values.
There are also the following options:
• Change color slowly
• Change color normally
• Change color quickly
• OFF
The current setting is displayed immediately.
Milk and foam
Possible with optional Cup&Cool
with temperature monitoring.
Illumination