User manual
30
User Manual WMF8000S
Software | Operating options
Load recipe
A saved recipe is loaded to abeverage button here.
Touch abeverage button
Touch the “Load recipe” pad
A submenu opens.
Mark the desired recipe
Touch the “Save recipe” pad
The beverage button is assigned to the newly selected
recipe.
Rinsing signal
Options: • active
• inactive
Default value:
active
active A signal sounds before automatic rinsing.
Decaf factor
The value for the Decaf factor is entered here.
Ground coffee quantity for Decaf (decaffeinated coffee)
is set by percentage for the ground coffee quantity set in
the recipe.
This setting applies to all coffee beverages with
preselected “Decaf”.
Options: • active
• inactive
Default value:
inactive
Temperature preselection hot water
Options: • active
• inactive
Default value:
inactive
active After the hot water button is pressed, three
dispensing temperatures are displayed for
selection.
inactive There is no temperature selection available.
Decaf factor
For aDecaf factor of 15 %,
CaféCrème is brewed with 15 %
more ground coffee, for example,
when prepared using the Decaf
function.