User manual

21
User Manual WMF8000S
Software | Ready to operate
3.2 Ready to operate
“Ready to operate” display
The display shown when ready to operate depends on the
individual settings and options of the coffee machine.
3.3 “Ready to operate” display pads
Beverage buttons
All beverage buttons that are ready to dispense are
illuminated.
Use the arrows to browse to additional pages with
beverages. (Adjustable.)
Manual insert pad
The manual insert pad is apreselection pad.
If the manual insert pad is touched prior to beverage
selection, the display requests that ground coffee be
inserted via the manual insert. Additional types of
pre-ground coffee can be used.
“Warm rinse” pad
 Touch the “warm rinse” pad
A rinse of the pipes with hot water starts. The water
warms the brewing system and guarantees an optimum
coffee temperature.
Recommended after alonger brewing pause, especially
before dispensing acup of espresso.
Barista pad-coffee strength
Display Coffee strength
without
touching
2beans normal, as per setting
touch 1x 3beans 15 % stronger than the setting *
touch 2x 1beans 15 % weaker than the setting *
* Maximum amount of ground coffee 19g per brewing
cycle
The coffee strength will be altered for the next brewing
cycle only.
Button layout
w Operating options
page 29
Cappuccino
Example: cappuccino button
Manual insert (active/inactive)
w Operating options
page 29
“Warm rinse” pad
(active/inactive)
w Operating options
page 29
Barista pad (active/inactive)
w Operating options
page 29