Operator`s manual

6 Operation

6.1 Starting the machine

Before the machine is started up, the main shut off valve

in the fresh water feed line must be opened and the main

electrical switch outside the machine turned on.

Turn lock switch 4 to position “I”- (On)

The machine is then switched on and will heat up to

operating temperature (approx. 12 minutes).

During the warm-up phase, the display alternately shows:

LOCKED 11:21

20.04. ^

--Warm up--

When the machine has warmed up, the display shows:

READY

Pre-sel. 01

11:21

20.04.

“READY”: The machine is ready for use.

“11:21”: Current time

“20.04”: current date

“Pre-sel. 01” Only one brew is produced

for each key press.

See page 52,

6.2.4 Quantity selection.

6.2 Making coffee

The unit has 2, 4 or 8 beverage buttons, depending on the

version.

Each button can be programmed individually.

WMF customer service will allocate your pushbuttons and

set up the machine according to your requirements.

Model 8001

Model 8101 / 8201

In the BISTRO

ECF

version, your unit has a second set of

buttons.

This is activated via the

button.