User manual

44
Care
Stir one measuring cap WMF milk system cleaner into 200 ml lukewarm water in a container >
Place all parts of the milk system > [9] in the cleaning solution for 5 hours or overnight [10]
> Then rinse all parts thoroughly with running warm water [11]
Assemble the upper and lower parts of the milk foamer >
Screw the plastic parts onto the air intake pipe >
Insert the milk nozzle into the milk hose >
Place the milk hose on the milk foamer > [12]
Insert the milk foamer from the bottom, and latch it in place
> [13] [14] [15]
Move the All-in-One spout to the lowest position > [16]
Insert the milk hose into the guide
> [17] [18] [19]
Replace the water tank, with its lid in place
>
With the brushes included with the
machine, you can clean the narrow
beverage spouts optimally.
Accessories and Spare parts chapter
see page 68
9 10 11
12 13 14 15
16 17 18 19