User manual

60
Troubleshooting
Bean hopper is empty
re ll beans
c o n  r m b e v e r a g e
There are not enough coffee beans in the coffee bean
hopper
Grinding is interrupted.
Pour coffee beans into the bean hopper
>
Close bean hopper lid >
Press the beverage button again >
The grinding process continues and the additional coffee
required for the brewing cycle is ground. The selected
beverage is then brewed.
Insert coffee grounds
insert coff. grounds
select beverage
The manual insert lid is open
Insert the ground coffee
>
Close the manual insert >
Select the desired beverage with the beverage button >
This procedure can be cancelled with the Cancel button.
Ground coffee that has already been inserted is removed
via the coffee grounds container.
Change fi lter
your selection pls
replace water  lter
The water fi lter must be changed
Change fi lter (see “Care” chapter)
>