User manual

48
Cleaning and Maintenance
Thoroughly clean the red milk nozzle seal >
Replace the red seal on the milk nozzle > [4] [5] [6]
Check that the red seal is properly positioned and fully inserted
>
Insert the milk foamer >
>
Fill up the water tank and replace it
The machine now heats up. Steam and condensed water will escape during this process.
The water hardness, the water flow and whether a tank filter is used determine the schedule
for descaling. This time is calculated by the WMF 800, and a request for descaling appears.
Descaling can be delayed by pressing the Cancel button; however, it must be carried out
within the next 50 brew cycles. Otherwise, beverage dispensing will be blocked. The blocking
will be cleared after a descaling.
4 5 6
Start the care program without request
Call up care programs
w General care programs
page 41
Immediately following descaling, you will
be prompted to clean the machine.
Cleaning the machine - Cleaning program
w General care programs
page 43