User manual

45
Cleaning and Maintenance
Replace water filter
Confirm with the > Program button
Remove the old filter
>
Insert a new filter >
Fill the water tank with cold tap water >
Place the lid on the water tank >
The lid must be on the tank when it is put in place.
Slowly slide the water tank back into the machine
>
After the filter is changed, confirm by pressing the > Program button
Place a 3 quarts (3 liters) container under the hot water spout
>
Start the filter rinse with the > Program button
When rinsing the filter, you will hear unusual noises. This is normal. The noises will end during the filter
rinse. During further operation, the machine will sound normal again.
After the rinse, the “ready to operate” display appears.
Depending on the water hardness and the water and at least after three months, the display
will remind you that the water filter must be changed.
The filter change can be delayed by pressing the Cancel button.
lter exchange
OK: P browse: -/+
remove water tank
remove old lter
place new lter
w Always follow the safety instructions
page 43
w Select the care programs
page 41
Remove milk foamer
w Cleaning the milk system
page 49
Replace water filter
Insert the WMF water filter
w Set-up
w Prepare the water tank
page 14
and
w Set-up w Basic settings
page 18
lter rinsing
place 3L container
under h.w. spout
rinsing lter ...
time remain.: 4 min.
Use the filter change for a thorough tank
cleaning.
w Cleaning the water tank
page 53
your selection pls
08:15 25.04.2010