User manual

42
Cleaning and Maintenance
Warm-up rinse/Coffee system rinse
The coffee system rinse is automatically performed when the machine is switched on or off.
A warm-up rinse can be started on demand.
Place an appropriate container under the All-in-One spout
>
Start the rinse with the > Program button
The pipes of the coffee machine are rinsed with hot water.
Hot rinse water is emptied through the All-in-One spout.
After the rinse, the “ready to operate” display appears.
WMF Connect & Clean milk system rinse
The WMF Connect & Clean milk system rinse is unique world-wide; it allows you to easily maintain
perfectly clean systems for beverages with milk components and thus maintain consistently enjoyable
beverages.
Slide the All-in-One spout to the top position
>
Select the displayed program with the > Program button
The display reports the individual activities that must be done before the rinse.
Place an appropriate container under the All-in-One spout
>
Wipe off the outside of the milk hose with a clean, damp cloth >
Place the milk hose with the milk nozzle into the hot water spout and turn it clockwise until it locks >
in place
Start the rinse with the
> Program button
w Always follow the safety instructions
page 41
warm up rinsing
OK: P browse: -/+
your selection pls
08:15 25.04.2010
Milk system rinse time
approx. 30 seconds
w Always follow the safety instructions
page 41
Place the milk hose on the hot water spout
and turn it clockwise until it locks in place.
milk system rinsing
OK: P browse: -/+
connect hose
start: P