User manual

41
Cleaning and Maintenance
General care programs
The automatic coffee system rinse requires that sufficient water be in the tank at all times.
The rinse water is caught in the drip tray (min. 4 ounces / 120 ml). Empty the drip tray regularly or place
a container under the All-in-One spout during the rinse.
After each brewing cycle, in the heating up phase and during the care programs, release water runs into
the drip tray. This rinses any remaining coffee from the pipes. This is a completely normal procedure
and not an error in the coffee machine.
CAUTION. Health hazard.
Cleaning and descaling agents are irritants and when the cleaning program is running,
they become very hot.
Avoid any contact with these liquids.
NOTICE. Risk to machine.
Cleaning and descaling agents are irritants.
The plastic parts of the coffee machine, with the exception of the water tank, may not come
into contact with the descaling agent.
Follow the instructions on the packaging and in the Safety chapter.
NOTICE. Risk to machine.
Run the care program regularly, and without delay when indicated on the display. WMF
assumes no liability for damage due to lack of cleaning or descaling, or due to the use of
other cleaning or descaling agents than those provided by WMF. All guarantee and warranty
claims are then void.
Select the care programs
To select the care programs without a previous request on the display:
Press the care button briefly
>
Use the care button to browse to the desired program >
Select the displayed program with the > Program button
Care button
select care program
browse: -/+
Cancel operation
Care button
Select / confirm
Page forward
Increase value
Page backward
Reduce value
The new values are saved when you exit
the program.