User manual

38
Other settings
Other settings
Set the grinding degree
With the infi nitely adjustable grinders, you can tune your WMF 800 optimally for your type of coffee. If
you change your type of coffee, you can adjust the grinding degree.
Use the supplied multitool.
Open the lid of the bean hopper
>
Place the multitool on the grinding degree setting knob >
Start the coffee dispensing cycle, and wait for grinder to start >
For a fi ner grind: press the multitool down, and turn it counter-clockwise •
For a coarser grind: press the multitool down, and turn it clockwise •
NOTICE. Risk to machine.
The grinding degree can be set fi ner only if the grinders are running.
Never adjust by more than a quarter turn in one step.•
Do not go past the stop with force. •
The factory setting for the grinding degree is designed for the properties of average coffee
beans. The effect of a change in the grinding degree can be evaluated only after dispensing
the second cup after the new setting has been made.
The following limits apply to the adjustment:
Grinding degree too fi ne
The dispensing stream is interrupted, and / or fl ow fault.
–> the ground coffee is stopping up the brewing sieve.
Grinding degree too coarse
The coffee fl ows too fast; the crème is too light and has too little body; the aroma is fl at.
Correct setting
Check your setting by making a double cup of Espresso. If the dispensing stream is
interrupted, and / or a fl ow fault is indicated on the display, then set the grinding degree at
least a quarter turn more coarse.