User manual

32
Settings
If necessary the new setting can be tested by a dispensing test >
The taste and the composition of the beverage remains the same, only the volume is changed as
programmed.
As soon as the cup volume is set as desired, confirm the new value with the Program button
Beverage settings
Here you can adjust the individual recipe components of your coffee specialties according to your
personal tastes.
The following settings are available:
Water volume•
Coffee strength•
Milk volume*•
Rest time for Latte Macchiato•
Sequence of dispensing of milk and coffee*•
Pre-brew (aroma development)•
* Option only available for beverages with milk or milk foam
Test settings
You can start a preparation test with the new settings at any time.
Place a cup under the All-in-One spout
>
Press the beverage button again >
Test the beverage >
CAUTION. Burning and scalding hazard.
The All-in-One spout and the hot water spout can get very hot.
The beverages dispensed and the escaping steam are very hot.
Never touch the spouts during or directly after testing and dispensing beverages.
Never touch the beverages, rinse and cleaning water, or steam during or directly after
dispensing beverages.
cup volume: 100 %
OK: P Test:bev.btn.
Technical Data
w Technical Data
page 69