User manual

28
Operation
Switching the coffee machine on and off
Switching on
> Press the on / off button
The welcome display appears, then the coffee machine heats up.
CAUTION. Burning and scalding hazard.
The All-in-One spout and the hot water spout can get very hot.
The beverages dispensed and the escaping steam are very hot.
Never touch the spouts during or directly after dispensing beverages.
Never touch the beverages, rinse and cleaning water, or steam during or directly after
dispensing beverages.
Place a container for the rinse water
> (approx. 4 ounces / 120 ml) under the All-in-One spout
After the machine is heated up, there is a coffee system rinse. This rinse warms up all the pipes.
The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate.
The “ready to operate” display appears.
Switching off
> Press the on / off button for approx. 3 seconds
Place a container for the rinse water
> (approx. 4 ounces / 120 ml) under the All-in-One spout
If beverages with milk, such as Latte macchiato, were prepared, then you will be asked to perform
a milk system rinse.
A coffee system rinse begins after that. Follow the display messages.
The machine switches off.
WELCOME
WMF 800
Time from switching on until ready to
operate approx. 4 min.
heating up ...
your selection pls
08:15 25.04.2010
Milk system rinse
WMF Connect & Clean
w Cleaning and Maintenance
w General care programs
page 41