User manual

27
Operation
WMF All-in-One spout
The WMF 800 has a unique system that has been standard in WMF professional machines for many
years: The All-in-One spout. It dispenses coffee and milk foam simultaneously, with variable height
adjustments, almost any cup will fit beneath it.
The adjustment height ranges from 2 ⅔-5
3 /
5
inches (67-141 mm).
The double milk foamer lets you prepare 2 cups of Cappuccino at once: perfect coffee for two.
Adjusting the height
Hold the All-in-One spout firmly between your thumb and forefinger and move it to the desired >
height
Milk position of WMF All-in-One spout
Milk is dispensed when the All-in-One spout is in the top position.
The top position is intended solely for milk dipsensing.
If the All-in-One spout is not at the top position when milk is selected:
The following messages are displayed alternately:
1x mug of milk
move spout up max.
1x mug of milk
conrm beverage
Slide the All-in-One spout all the way to the top
>
Press the milk button again briefly >
After dispensing milk, the All-in-One spout should be slid downward slightly. The display prompts for
this.
Milk foam position of All-in-One spout
Milk foam is dispensed at all positions of the All-in-One spout, except the top position.
This also applies to coffee beverages that contain milk foam.
If the All-in-One spout is in the top position when milk foam, or coffee beverages that contain
milk foam, are selected:
The following messages are displayed alternately:
1x Latte Macchiato
lower spout into
1x Latte Macchiato
conrm beverage
Lower the All-in-One spout from the top position
>
Press the desired beverage button again >