User manual

24
Operation
Increase coffee strength for the next beverage
Before each coffee preparation, you can decide how strong you want the next coffee beverage to be.
The following coffee strengths are available:
Mild• (approximately 15 % weaker than the saved setting)
Normal• (corresponds to your setting)
Strong• (approximately 15 % stronger than the saved setting)
Place a cup under the All-in-One spout
>
Select the desired coffee strength with the >
–
and
+
buttons
Select the beverage
>
The beverage button selected lights up and the beverage name is indicated on the display.
The selected beverage is prepared.
To cancel the current beverage dispensing, press the Cancel button.
Coffee preparation using the manual insert
In addition to the coffee bean hopper, you can use the manual insert to make another type of coffee,
such as decaffeinated coffee.
Place a cup under the All-in-One spout
>
Remove the lid of the manual insert >
The display instructs:
Place the ground coffee for one brewing cycle in the manual insert
>
Close the lid >
Select the beverage with the beverage buttons (one cup) >
This procedure can be cancelled with the Cancel button.
NOTICE. Risk to machine.
Always use ground coffee for the manual insert (max. 15 g per preparation).
The coffee machine gets soiled inside if too much ground coffee is put in at once.
Do not use water-soluble, freeze-dried instant coffee.
Each brewing cycle using the manual insert is measured separately.
Coffee ground too fi ne can cause malfunctions.
w Preparation of coffee beverages
page 22
w Cancel beverage preparation
page 26
insert coff. grounds
select beverage
Cleaning the brewing unit
w Cleaning and Maintenance
w Manual cleaning
page 49