User manual

23
Operation
Example: Prepare a cup of Cappuccino
Here is a step-by-step description of how to prepare a cup of Cappuccino.
This description serves as a guide for the preparation of all beverages. All steps are carried out for the
preparation of the other beverages as shown below.
If necessary, adjust the height of the All-in-One spout to the height of the cup
>
The All-in-One spout must not be in the top position.
Place a cup under the All-in-One spout
>
Press the Cappuccino button briefly >
See beverage button overview.
The beverage button pressed lights up.
The display indicates:
The coffee beans are freshly ground for the selected beverage.
The preparation occurs as specified in the beverage settings.
The beverage is prepared and dispensed into the cup through the All-in-one spout.
The display indicates:
Dispense milk:
The All-in-One spout is at the top position.
Dispense milk foam:
The All-in-One spout is not at the top
position.
If a beverage is selected and the
All-in-One spout is not in the appropriate
position, then a reminder is shown on the
display.
w Dispensing milk and milk foam
page 25
w WMF All-in-One spout
page 27
1x Cappuccino
your selection pls
08:15 25.04.2010