User manual

22
Operation
Operation
This chapter explains all you need to know about using your WMF 800.
Prepare coffee beverages•
Prepare milk and milk foam•
Dispense hot water•
All-in-One spout•
Switching on and off the coffee machine / timer operation•
CAUTION. Burning and scalding hazard.
The All-in-One spout and the hot water spout can get very hot.•
The beverages dispensed and the escaping steam are very hot.•
Never touch the spouts during or directly after dispensing beverages.•
Never touch the beverages, rinse and cleaning water, or steam during or directly after •
dispensing beverages.
Preparation of coffee beverages
The WMF 800 has an operator control panel with five beverage buttons. It covers seven international
coffee specialities, as well as milk and milk foam. Each of the buttons is assigned to several beverages.
Beverage button overview
Milk button in the center:
Milk = press briefly
briefly 1x Espresso
1x Americano briefly
long 2x Espresso 2x Americano long
briefly 1x Cappuccino 1x Cafe Latte briefly
long 2x Cappuccino 2x Cafe Latte long
Milk foam = press and hold
• Press briefly -> the symbol for the selected beverage lights up
Press long• -> the symbol for the selected beverage blinks (not for milk or hot water)
Always follow the safety instructions to
operate the WMF 800 safely.
w Safety
page 5
w Control buttons
page 3
w Operating and illumination concept
page 3
Hot water button
Adjusting the height
w WMF All-in-One spout
page 27
Coffee preparation using the manual insert
w Dispensing milk and milk foam
page 25