User manual

20
Set-up
At the end of the set-up program, a brewing test is carried out.
The Espresso button flashes.
Place a cup under the All-in-One spout
>
Press the flashing Espresso button briefly >
The brewing test begins.
The coffee grinder will be filled with coffee beans during the brewing test.
Discard this first cup of coffee. After this, the machine is ready to operate.
Set-up complete
Set-up is now complete. All settings can be changed now, or at a later time.
The following setting options are available:
Set cup size•
Beverage setting•
• Basic settings
Grinding degree setting•
To help you prepare the perfect cup of coffee to your preferences, we have compiled a chapter of
“Tips and Tricks”.
CAUTION. Burning and scalding hazard.
The All-in-One spout can get very hot. The rinse water is very hot.
Don’t reach under the All-in-One spout during rinsing.
Always move the All-in-One spout carefully.
Switching on and off
CAUTION.
When switching the machine on and off, an automatic coffee system rinse starts. This
requires that sufficient water be in the tank at all times. Empty the drip tray regularly,
since the rinse water (approx. 4 ounces / 120 ml) runs into the drip tray through the
All-in-One spout. You can place a container under the All-in-One spout to catch the rinse
water.
About the timer: Switching on and off
CAUTION.
The coffee machine automatically switches itself off at a pre-set time. In this circumstance
also, the machine performs a coffee system rinse directly before switching off.
Empty the drip tray regularly, since the rinse water (approx. 4 ounce / 120 ml) runs
into the drip tray through the All-in-One spout. You can place a container under the
All-in-One spout to catch the rinse water.
Cancel operation
Care button
Select / confirm
Page forward
Increase value
Page backward
Reduce value
The new values are saved when you exit
the program.
your selection pls
08:15 25.04.2010
w Set the grinding degree
page 38
w Tips and Tricks for Perfect
Coffee Beverages
page 55
Setting automatic switch off time after
last beverage dispensing
w Settings w Basic settings
page 18