User manual

15
Set-up
Remove the built-in filter cap from the water tank by pushing it to the side > [1]
Pull up the latch on the cartridge adapter
> [2]
Stick the cartridge adapter on the water outlet from the top
> [3]
Push down the latch on the cartridge adapter
> [3]
Unpack the water filter cartridge and place it on the cartridge adapter
> [4]
NOTICE.
The built-in filter cap attaches very securely.
NOTICE. Risk to machine.
Fill the water tank only with clean, cold water.
Never use hot water, mineral water, milk or other liquids.
Fill the water tank
Fill the water tank with cold tap water (max. 0.5 gal / 2.2 liters) >
Water can then be added, with the lid in place.
Place the lid on the water tank
>
The lid must be on the tank when it is put in place. >
Slowly slide the water tank back into the machine >
1 2 3
4