User manual

14
Set-up
Set-up
Unpacking and setting up
> Unpack coffee machine and place on a flat, level surface away from the edge of the counter
NOTICE. You must protect a sensitive installation surface against damage using a
waterproof, heat-resistant, non-slip mat.
Regularly check the coffee machine and keep the installation surface dry.
If liquid leaks regularly, this is a machine malfunction that must be checked immediately.
For water hardness 0-4, do not use the water filter.
CAUTION. Risk to the user.
Always follow the safety instructions in the “Safety” chapter, starting on page 5.
Read all instructions before starting-up the coffee machine.
> After removing the packaging, make sure the product is complete and undamaged and that all
accessories are present
Do not use the appliance if visibly damaged. Contact Customer Service.
Inspect the coffee machine for possible shipping damage
>
Connect the included power cord to the machine (connection on the rear of the machine) >
>
Plug the cord into a grounded outlet
Place the drip tray grid into the drip pan
>
Place the drip tray in the machine >
Test the water hardness
Briefly dip a carbonate hardness test strip into water (approx. 1 second) >
One minute later, read the degree of hardness on the color scale of the test strip package >
The water hardness is set during set-up.
Prepare the water tank
> Lift the water tank slightly and remove from the coffee machine
Remove all accessories from the water tank
>
Rinse the water tank thoroughly with clean, cold water >
Insert the WMF water filter
The optional WMF water filter ensures the best coffee quality and protects the coffee machine from
calcium deposits.
Power cord connection
w Accessories and spare parts
page 68
Drip tray and drip tray grid
Water tank