User manual

▪ Pull out the power plug in the following cases:

⋅ If faults arise during operation

⋅ Before cleaning and servicing

⋅ After use

▪ Never immerse the appliance in water.

▪ We will not accept any liability for damage resulting from misuse, incorrect

operation, or unauthorised repairs. Nor may any claims be made under the

warranty in such cases.

▪ The appliance is not intended for commercial use.

Start-up

Wash the removable parts before initial use. Leave any excess power cable which

is not required in the cable compartment and insert the cable in the notch

provided. Connect the power plug to a mains socket.

Place the juice collector and strainer on the appliance along with the right

reaming cone to ﬁt the size of the fruit.

Note: The small reaming cone is located within the large reaming cone.

If using the large reaming cone, place it on the small reaming cone with the pulp

extractor. It will click into place. Then place a glass under the pouring lip. Halve

the citrus fruit and, with the cut end facing down, place one half at a time on the

reaming cone and press down. The motor will start up automatically as the appli-

ance has an automatic start-stop function. The juice ﬂows through the strainer,

which catches the pulp and pips, into the juice collector and through the pouring

lip into the glass. The machine stops operating when the pressure is no longer

applied. Repeat this process a few times to extract as much juice as possible from

the fruit. The motor may stop working if too much pressure is applied. In this case

reduce the pressure. Before serving the glass of juice, close the pouring lip by

taking hold of it on both sides and pushing it upwards. If you intend to use the

juicer again after a short time, place the cover on the machine in the interests of

hygiene while it is out of use. Citrus juice should be drunk while fresh. Under no

circumstances should the juice ever be stored in metal containers.

Cleaning and maintenance

Remove the power plug after use. It is advisable to wash the removable parts

immediately after use, either with hot water and washing-up liquid or in the

dishwasher. Do not use scouring agents.

Pull the reaming cone straight up to remove it. Never immerse the motor housing

in water - just wipe the outside clean with a damp cloth.