User's Manual

Mirobot Mirobot Robot Users Manual
Document version Users Manual Beijing Tsinew Technologies Co.,Ltd.
2. Quick start
This chapter briefly introduces how to control Mirobot through Mirobot Studio, so that users
can quickly understand and use Mirobot, and its process is shown in Figure 2.1.
Figure 2.1 quick start flow chart of Mirobot manipulator
2.1 Manipulator cable connection
(1) Use USB data cable to connect the manipulator and computer. As shown in Figure
Figure 2.2 connecting the robot arm to the computer
(2) Connect the power supply to the robot arm, as shown in Figure 2.3.
Start
Mirobot wiring
connectionconnectionco
nnection
Install Mirobot studio control software
Mirobot wiring
Powering on
Start using themanipulator
End