User's Manual

Mirobot Mirobot Robot Users Manual
Document version Users Manual Beijing Tsinew Technologies Co.,Ltd.
 During the handling and installation, please be careful, and pay attention to handle with care
according to the instructions on the packing box, and place it correctly according to the
direction of setting up the robot. Otherwise, it is easy to damage the machine.
 Before operating the manipulator, please refer to the user manual attached to the box.
1.2 Precautions
 Do not place your fingers in the gap between the upper and lower arms during operation.
Prevent pinching.
 If the coordinate reading of the manipulator is abnormal during use, please press the reset
button on the back of the base.
 Each time the mechanical arm is powered on again, it must first press the RESET button in
the Mirobot Studio to reset. The user must wait for the reset action to be completed before the
control operation can be carried out.
 Please disconnect or connect external devices, such as Bluetooth, WiFi, handle ,and infrared,
when the manipulator is completely powered off sensor kit, color sensor kit, etc. Informal
writing. Otherwise, it is easy to damage the machine.
 When using laser engraving, please wear protective glasses. Do not shine on your eyes and
clothes.