User's Manual

Mirobot Mirobot Robot Users Manual
Document version Users Manual Beijing Tsinew Technologies Co.,Ltd.
Figure 2.17 stop button in Mirobot Studio
After the emergency stop operation, if it is necessary to continue using the manipulator, press
the entity reset button next to the power button on the manipulator base, as shown in Figure 2.18.
Figure 2.18 reset button on the base of the manipulator
Be careful
After the emergency stop operation of the Mirobot manipulator, it is also necessary to
perform the reset operation in the Mirobot Studio again.
4.Using the axis motion control function of Mirobot
(1) Click the command tab, as shown in Figure 2.19.