User manual

Industrial Cellular Router User Manual
www.wlink-tech.com 34
3.7 “RST” Button for Restore Factory Setting
If you can’t enter web interface because of other reasons, you also can use this way.
For R200 Series, “RST” button is on the left or Ethernet port, for R520 Series, the button is
on the left of NET light. This button can be used when the router is in use or when the
router is turned on.
Press the “RST” button and keep more than 8 second till the NET light stopping blink.
The system will be restored to factory.
Table 3-13 System Default Instruction
Parameter
Default setting
LAN IP 192.168.1.1
LAN Subnet Mask 255.255.255.0
DHCP server Enable
User Name admin
Password admin
After reboot, the previous configuration would be deleted and restore to factory
settings.