User manual

Industrial Cellular Router User Manual
www.wlink-tech.com 20
Figure 3-5 WLAN Basic Settings GUI
Table 3-4 Basic Setting Instruction
Parameter Instruction
Enable wireless Enable or Disable the Wireless
Wireless mode Support AP, AP+WDS, Bridge, Client, WDS
Wireless Network
protocol
Support Auto, IEEE 11b/g/n selectable
SSID The default is router, can be modified
Channel The channel of wireless network, suggest keep the default
Channel Width 20MHZ and 40MHZ alternative
Security Support various encryption method
Step 2
Please click “Save” to finish.
----End
3.3.2
Wireless Client Filter Setting
Step 1
Single click “WLAN > Wireless Filter”.