User manual

Industrial Cellular Router User Manual
www.wlink-tech.com 19
3.2.3 Dynamic DNS Setting
Step 1
Single click “ Basic Network->DDNS to open the DDNS setting GUI.
Figure 3-4 Dynamic DNS Setting
Table 3-3 DDNS Setting Instruction
parameter Instruction
IP address
Default is standard DDNS protocol. for customized protocol, pls
contact our engineer. Usually, use default IP 0.0.0.0
Auto refresh
time
Set the interval of the DDNS client obtains new IP, suggest 240s or
above
Service
provider
Select the DDNS service provider that listed.
Step 2
Please Click “ Save “ to finish.
----End
3.3 WLAN Setting
It’s mainly for router which support Wi-Fi, you can modify and configure WLAN
parameter through Web GUI, below is the common setting
3.3.1 Basic Setting
Step 1
Click “WLAN->Basic Setting” to configure relative parameter