User's Manual

Repeater Installation
2-15
2-10 CONNECTORS
Figure 2-7.1 shows the connectors and Table 2-1 provides a description of each connector on the
R1910 unit.
Table 2-1. R1910 Connectors
Reference
Designator Label Description
J1 AC PWR IN This POWER connector is a multipin connector cabling a user-
supplied ac power source (110 VAC, 60 Hz) to the power
supply in this unit.
J2 RS-232 This 9 pin D-sub female connector is provided for RS-232
communications between the R1910 and a PC.
J3 SERVER Receives Handsets RF, Transmits Base Stations RF, connects to
Server antenna.
J4 DONOR Receives Base Stations RF, Transmits Handsets RF, connects to
Donor antenna.
Figure 2-7.1 R1910 I/O Connections
Figure 2-7.2 shows the connectors and Table 2-2 provides a description of each connector on the
R1920 unit.
Table 2-2. R1920 Connectors