User's Manual

Repeater Installation

2-10

2-9.2 Method 2 – Wider Bandwidth Repeater

This method is much less costly but must be used and deployed carefully. The repeater in this case

uses a filter that passes 2 or more signals. The inter-modulation products that are produced by these

signals must be kept to below -13dBm to comply with the FCC (Note that the inband spurious may

need to be kept below –13dBm in order to comply with an air interface standard). You can see from

Figure 2 that the amount of equipment necessary is one half that as seen in the multiple repeater

deployment.

Server

Donor

Repeater