User's Manual
Table Of Contents
- Introduction
- Table of Contents
- Index of Tables
- 1 Hardware characteristics
- 2 Electrical characteristics
- 3 Wireless characteristics
- 4 How to use
- 5 Ordering information
- 6 FCC Caution
- 7 Revision history
How to use WGATE-PRO-41A1F1 rev 1.5
4.5.1 Insert your SIM card in the gateway
• Unscrew the back of the gateway.
• Insert your SIM card in the SIM card slot of the gateway.
• Close the gateway.
4.5.2 Configure the cellular module
Go to the configuration tab of the administration web interface.
• In the Cellular section, fill in the cellular informations.
• Press the Save configuration button in the Cellular section to save the configuration.
• Press the Connect button in the Cellular section to enable the cellular connection.
Upon pressing the apply button, the Cellular status should switch to on. Then, if the configuration
is correct and the signal strength of the cellular network is sufficient, the status should turn to
on | connected | -51 dBm ....
WIZZILAB Technical Documentation 22/26