User's Manual

How to use WGATE-PRO-41A1F1 rev 1.5
the type of setup you want.
If you have never touch the Wizzigate ethernet configuration on its web interface configuration tab,
then it is configured by default to use DHCP. Therefore you can just plug the gateway to the net-
work, and it should automatically get access to it. If you changed the Wizzigate ethernet configura-
tion:
• Go to the configuration tab of the administration web interface.
• In the Ethernet section, tick the DHCP checkbox.
Using a static IP configuration
If you don't have DHCP server on your network, then you will need to configure the gateway with a
fixed IP configuration. To do that:
• Go to the configuration tab of the administration web interface.
• In the Ethernet section, untick the DHCP checkbox.
• In the Ethernet section, Fill the network configuration settings.
• Press the Apply button in the Ethernet section.
4.5 Cellular
WARNING: The current wizzigate software does not support the use of a PIN code, even though
the field exist in the configuration. Setting the PIN code might work the first time you try, but will
not persist through a gateway reboot. Therefore only use the wizzigate with a SIM card for which
the PIN code is disabled .
WIZZILAB Technical Documentation 21/26