Product Info

DWM1001C Datasheet
© Decawave Ltd 2017 Subject to change without notice Version 1.40C Page 22
10.1.3 European Union (ETSI)
The DWM1001C Module has been certified for use in European Union countries. If these modules are
incorporated into a product, the manufacturer must ensure compliance of the final product to be European
harmonized EMC and low voltage/safety standards. A declaration of Conformity must be issued for each of these
standards and kept on file as described in Annex II of the R&TTE Directive.
Furthermore, the manufacturer must maintain a copy of the modules' documentation and ensure the final product
does not exceed the specified power ratings, antenna specifications, and/or installation requirements as specified
in the user manual. If any of these specifications are exceeded in the final product, a submission must be made
to a notified body for compliance testing to all required standards.
IMPORTANT: The “CE” marking must be affixed to a visible location on the OEM product. The CE mark shall
consist of the initials “CE” taking the following form:
The CE marking must have a height of at least 5mm except where this is not possible on account of the nature of
the apparatus.
The CE marking must be affixed visibly, legibly, and indelibly.