Data Sheet

How to use USPACE-KYD-2F
3.3 Charging
When the tag is connected to an electronic device’s USB port or 5V DC power supply with USB
connector, the tag enters charging mode, and the LED starts blinking in orange. The tag becomes
inactive (no scanning). It remains accessible for configuration updates (see Advanced Configuration
Section 4).
When the battery is fully charged, the LED will start blinking in green.
The device stays in charging mode while the charger is detected (even if th battery is fully charged).
When the charger is unplugged, the device switches back to monitoring mode and stops blinking.
WIZZILAB Technical datasheet 9/20