Data Sheet

Functionality USPACE-KYD-2F
2.3 Contact Events Management
The tag has different contact events recording/reporting management modes :
* Stand-Alone : Events are not recorded
* Stand-Alone with traceback : Events are recording in internal flash and can be dumped through
serial or BLE.
* Real-time monitoring : Events are recorded in internal flash and reported over-the-air
immediately to a Cloud service
All gathered contact information is anonymous. Indeed the contact/alert reports contain only
information on the tags identifiers and event dates, and cannot be associated to places or persons,
unless this is specifically (and manually) assigned by the system administrator.
2.4 Autosleep
The tag embeds a motion detector. When the device is motionless for a certain period, the tag stops
monitoring and becomes inactive. Monitoring resumes when motion is detected. The autosleep can
be disabled.
2.5 Default Configuration
By default (factory settings) tags are configured for human-to-human minimal distance monotoring
for Covid-19 sanitary protection.
The view zone distance is set to 80 dB link budget on the scan wireless link
The alert zone is set to 2 meters
The safety margin is set to 20 cm
Autosleep is enabled, the motionless period is set to 10 minutes.
The tag functions in real-time monitoring mode - the contact events are recorded and reported over-
the-air when a DASH7 connectivity is present (a DASH7 gateway is within wireless link range).
WIZZILAB Technical datasheet 7/20