Operating instructions

! WARNING
Always switch the power off after using your PX1. Leaving it on
risks accidental activation of the heater, and drains the battery.
! WARNING
Do not press and hold the Heater Button for more than 2
minutes, or re-activate the 60s cycle for more than 3 times
continuously without letting the PX1 cool down.The heater
element in PX1 will reach 900ºC (1,652ºF) or more. Even with
the ceramic insulation, heat will eventually be transferred to
other parts of the PX1, causing damage to the electronics, fire,
or bodily injury. If you notice any melting, smoke or burning
smell emitting from the PX1, turn off the power immediately and
place the PX1 outdoors and away from any flammable material.
Heater Button Function
Slide the Power Switch to ON. The battery
level LED will light up . See section on
battery charging for explanation of the LED
colors.
After making sure the appropriate tem-
perature is selected, depress the Heater
Button to activate a 60-seconds cycle.
When the heater cycle is activated, the
Heater Status LED will light up -
Red:
Blue:
The heater will be activated for 60-seconds.
The heater will run continuously. Letting go of
the button will restart a 60-seconds cycle.
Press & Let go
Press & Hold
during heating
Depressing the Heater Button anytime during the heat cycle will
restart the 60-second cycle.
1.
2.
3.
Activating the Heater Vaporizing with StirHeat™
1
3
2
60-seconds cycle in progress.
Heat cycle is completed, heater on
standby.
Using your index finger, rotate the Stirring Wheel
to spin the Crucible. The ceramic stems within
the Crucible will agitate the herb or pipe tobacco
when rotated. This action helps mix the content
so heat is evenly distributed throughout.
Inhale a small amount of vapor via the
Mouthpiece. For best results, draw in the
vapor after the first or second heat cycle
to ensure that the content has reached
appropriate temperatures. When com-
bined with stirring, heat will be better
distributed throughout the Crucible.
14 15