Operating instructions

! WARNING
Push the Filter Cap down towards the PX1
body until it bottoms out.
Twist the Filter Cap counter-clockwise
(when looking from the top) until it rotates
no further.
Lift up the Filter Cap. Carefully remove the
Crucible.
1.
2.
3.
Remove the Crucible
1
2
3
Cleaning
Fragile parts
Gently peel the Filter Cap off the Cover.
Remove the Ceramic Filter from the Filter
Cap.
1.
2.
Remove the Ceramic Filter
The removed parts (Filter Cap, Filter, Crucible and Mouthpiece)
can be washed. Use the supplied cleaning brush with mild soap
and water or alcohol to wash the parts. Do not use any abrasive
or sharp tools. Do not expose the PX1 main body to water.
After the parts are washed and dried,
assemble them to the PX1 in the reverse
order. Note orientation of the Crucible
when inserting back onto the PX1.
Cleaning the Parts
1
2
16 17