User's Manual

© Copyright 2015 WIZnet Co., Ltd. All rights reserved. 45
2.7.4. Port Setting
 Settings about wired port. In case of Gateway Mode, WAN port is set here
 In case of Gateway Mode, it is better to use the default WAN port number (Port #0)
 If you are not the administrator, we do not recommend changing this.
Type Description
WAN Port Select the WAN Port in case of Gateway Mode.
Port #0 Enable / Disable Port #0.
Port #1 Enable / Disable Port #1.
Port #2 Enable / Disable Port #2.
Port #3 Enable / Disable Port #3.
Port #4 Enable / Disable Port #4.
2.7.5. Packet Statistics
 System Statistics shows the system’s memory information and system’s data transmission size.
Type Description
Memory Total System Memory Size
Memory left System Free Memory
Rx Packet Rx Packets counts
Rx Byte Rx Bytes Counts
Tx Packet Tx Packet Counts
Tx Byte Tx Bytes Counts
2.7.6. System Status
System Status shows the status of the system, status of the system’s network information, and the link
status of LAN port.
Type Description
F/W Version Shows the firmware version.
System Up Time Shows the system up time.
Operation Mode Shows the operation mode currently being used.
Internet Configuration Shows the internet configuration information.
Local Network Shows the local network information.