User's Manual

2.5.3. Packing Condition (Incoming serial data packing condition)

Type Description

Time

Data packing until the set time and then sent to server after the set time.

Size

Data packing until the set size and then sent to the server.

Character

Data packing until the set character and then sent to the server.

Inactivity Time:

TCP/IP connection is discontinued if there is neither serial data nor network

data during the set time.

H/W CMD switch

-. Enable/Disable the H/W CMD switch pin.

-. H/W CMD switch pin is the switch for sending commands from CPU to

WizFi630A.

2.5.4. Ethernet Data Tagging Option

This option is used to help serial device to identify who is the received serial data’s source; the

received serial data comes from Main Port or Aux Port.

Type Description

Status

Enable or disable this option (Checked : Enable, Un-Check : Disable)

Main Port

Before sending data from Main port to serial port, WizFi630A added a TAG

in the front of payload.

For example:

In-come LAN Data : “abcdegf”

Output data to Serial Port : “!MAIN!abcdegf”

Aux Port

Before sending data from Aux port to serial port, WizFi630A added a TAG

in the front of payload.

For example:

In-come LAN Data : “abcdegf”

Output data to Serial Port : “!AUX!abcdegf”