User's Manual

© Copyright 2015 WIZnet Co., Ltd. All rights reserved. 26
2.4.3. Wireless Security
 This chapter is about settings for wireless network security
Type Description
SSID choice
If multiple SSID are in use, choose the corresponding SSID for security.
Security Mode
Select security mode.
Access Policy
Disable : Access Control function will be disabled..
Allow Listed : allows communication with listed MAC client.
Reject Listed: blocks communication with listed MAC client.
Add a station MAC
Enter the client’s MAC address for controlling.
2.4.3.1. Wireless Security setting
 Authentication settings
Type Description
OPENWEP
All users are authorized.
SHAREDWEP
Users only with correct network key are authorized.
WEPAUTO
OPEN/SHARED Mode is selected automatically.
WPA-PSK
WPA certified standard with improved security.
WPA2-PSK
Improved WPA certified standard
WPAPSKWPA2PSK
Both WPZ-PSK and WPZ2-PSK are supported.
WPA
WPA certified standard including 802.1x.
WPA2
Improved WPA certified standard.
WPA1WPA2
Both WPA and WPA2 are supported.
802.1x
Radius authentication through WEP Key.
2.4.3.2. Wireless Authentication Setting
Encryption Type Description
None
OPEN Encryption algorithm is not used.
WEP64
SHARED/
WEPAUTO/802.1x
WEP encryption algorithm is used with 64bit key.
WEP128
WEP encryption algorithm is used with 128 bit key.
TKIP
WPA/WPA2/
WPA-PSK/
WPA2-PSK/
WPA1WPA2/
WPAPSKWPA2PSK
More complex encryption algorithm than WEP Is used.
AES
New encryption algorithm is used.
TKIP/AES
Support TKIP/AES simultaneously