User's Manual
© Copyright 2015 WIZnet Co., Ltd. All rights reserved. 24
2.4.2. Advanced Wireless Settings
2.4.2.1. Advanced Wireless Settings ( AP Mode )
Only works at the AP Mode, Gateway Mode, and AP-Client Mode
This chapter is about higher-level setting for wireless LAN.
Type Description
Tx Power
Controls the range of wireless radio being sent. The range of wireless radio being sent
gets larger as the value is larger.
Tx Burst
The wireless speed can be maximized by enabling this function. However, it is
recommended to disable this function for stable connection when numerous stations
are connected together..
Packet Aggregate
Numerous packets can be transmitted in one MPDU by enabling this function
Short Slot
The performance of wireless station connected to 11g can be improved by enabling
Short Slot. However, it is recommended to disable Short Slot if there is a wireless
station with unstable connection.
Short Preamble
If user enables Short Preamble, performance might slightly improve. However, the
compatibility with wireless LAN card when connecting could decrease. It is
recommended to disable Short Preamble for best compatibility.
RTS Threshold
When a data is larger than the threshold size, it can be sent RTS/CTS. Smaller
threshold size may enable more stable wireless communication; however the maximum
speed is lower. Smaller threshold size is recommended in case of more wireless
stations are connected at the same time. The setting range is 1~2347.
Fragmentation
Threshold
When a data is larger than the threshold size, it is fragmented and sent. Smaller
threshold size may enable more stable wireless communication; however the maximum
speed is lower. Smaller threshold size is recommended in case of many interruptions
from surrounding signals. The setting range is 256~2346.
BG Protection
Setting for wireless communication when using both 11b and 11g LAN cards.
Recommended for automatic settings in general.
Beacon Interval
Controls the interval of sending beacon.
The setting range is 20~999 and 100ms is usually used.
Country Code
Setting for country code.
Example: KR(Republic of Korea), US(United State), FCC(Europe), JP(Japan), FR(France),
ES(Spain)
WMM
(Wi-Fi Multimedia)
Decide whether or not to use WMM function.
DLS
Decide whether or not to use DLS (Direct Link Setup) function.
2.4.2.2. Advanced Wireless Settings ( Client Mode )
Set Station advanced configurations in station mode.
Type Description
RADIO OFF
Enable / Disable wireless LAN..










