User's Manual

© Copyright 2015 WIZnet Co., Ltd. All rights reserved. 20
2.3. Internet Setting
2.3.1. Internet connection setting
 Select the internet service type and WizFi630A can connect to the internet
 If users would like access to Internet, Gateway Mode should be selected.
Type Description
WAN Connection
Type
Select the communication ways for Internet’s connection
- Static(Fixed IP)
- DHCP (Auto config)
- PPPoE
Host Name
Settings about module’s host name
Mac Clone
Some ISPs require that you register a MAC address. Users can directly enter MAC address
or use the MAC Clone function
2.3.2. Local network setting
 WizFi630A internal IP setting, DHCP server setting and DHCP.
Type Description
DHCP(Auto
config)
User should choose DHCP Mode when the user connects to the internet service such
as FTTH, cable modems, VDSL, or IP-ADSL
Static(Fixed IP)
Static IP setting window. If user receives static IP from ISP, user should set the Fixed IP
Input the network information that got from ISP
(such as IP, Subnet, Gateway, DNS)
PPPoE(ADSL)
-. User Name: Setting the User Name received from ISP
-. Password: Password assigned by ISP
-. Operation Mode: This mode is used for re-connecting when connection is bad
Type Description
IP Address
Enter the module’s IP. (Default Value : 192.168.16.254)
Subnet Mask
Enter the module’s subnet mask.
MAC Address
MAC Address of module’s LAN port (Wireless included). (Read Only)
DHCP Server
Decide whether the module’s DHCP server will be used.
Start IP Address
Set the start IP address that will be assigned from the DHCP server
End IP Address
Set the end IP address that will be assigned from the DHCP server.
Subnet Mask
Enter the value of subnet mask.
Primary DNS Server
Enter the primary DNS server address.
Secondary DNS Server
Enter the secondary DNS server address.
Lease Time
Enter the lease time when IP address is assigned.
Statically Assigned
Maximum of three IP can be statically assigned when IP address is
assigned.