User's Manual

WizFi360 User Manual
10.3.2.1. AT+CIPDOMAIN DNS Function ......................................................................... 38
10.3.2.2.
AT+CIPSTART Establishes TCP Connection, UDP Transmission .................. 39
TCP Connection: ............................................................................................................................. 39
10.3.2.3.
AT+CIPSEND .................................................................................................. 40
10.3.2.4.
AT+CIPSENDEX ............................................................................................ 41
10.3.2.5.
AT+CIPCLOSE Closes the TCP/UDP Connection .............................................. 41
10.3.2.6.
AT+CIFSR Gets the Local IP Address ................................................................ 42
10.3.2.7.
AT+CIPMUX Enable or Disable Multiple Connections .................................... 42
10.3.2.8.
AT+CIPSERVER Deletes/Creates TCP Server .................................................... 42
10.3.2.9.
AT+CIPMODE Sets Transmission Mode .............................................................. 43
10.3.2.10.
AT+CIPSTO Sets the TCP Server Timeout .......................................................... 43
10.3.2.11.
AT+PING Ping Packets ........................................................................................... 44
10.3.2.12.
AT+CIUPDATE Updates the Software Through Wi-Fi ..................................... 44
10.3.2.13.
AT+CIPDINFO Shows the Remote IP and Port with +IPD ................................... 44
10.3.2.14. +IPD Receives Network Data .............................................................................. 44
10.3.2.15.
AT+CIPSNTPCFG Sets the Configuration of SNTP ............................................ 45
10.3.2.16.
AT+CIPSNTPTIME Checks the SNTP Time ........................................................ 45
10.3.2.17. AT+CIPDNS_CUR Sets User-defined DNS Servers; Configuration Not Saved in the
Flash 45