User's Manual

WizFi360 User Manual
10.2 Wi-Fi AT Commands ................................................................................................................... 22
10.2.1
Overview ...................................................................................................................... 22
10.2.2
Commands .................................................................................................................. 23
10.2.2.1
ˊ AT+CWMODE Sets the mode( Station/SoftAP/Station+Softap ) ......................... 23
10.2.2.2
ˊ AT+CWMODE_CUR Sets the Current Wi-Fi mode,Configuration Not Saved in the
Flash 23
10.2.2.3.
AT+CWMODE_DEF Sets the Default Wi-Fi mode; Configuration Saved in the
Flash
24
10.2.2.4.
AT+CWJAP Connects to an AP .......................................................................... 24
10.2.2.5.
AT+CWJAP_CUR Connects to an AP; Configuration Not Saved in the Flash .... 25
10.2.2.6.
AT+CWJAP_DEF Connects to an AP; Configuration Saved in the Flash ............ 26
10.2.2.7.
AT+CWLAPOPT Sets the Configuration for the Command AT+CWLAP .......... 26
10.2.2.8.
AT+CWLAP Lists Available APs ........................................................................... 27
10.2.2.9.
AT+CWSAP Configures the WizFi360 SoftAP .................................................... 27
10.2.2.10.
AT+CWSAP_CUR Configures the WizFi360 SoftAP; Configuration Not Saved in
the Flash Flash
................................................................................................... 28
10.2.2.11.
AT+CWSAP_DEF Configures the WizFi360 SoftAP; Configuration Saved in the
Flash Flash
29
10.2.2.12.
AT+CWLIF IP of Stations to Which the WizFi360 SoftAP is Connected ............. 29
10.2.2.13.
AT+CWQAP Disconnect from the AP ................................................................ 30
10.2.2.14.
AT+CWDHCP Enables/Disables DHCP ............................................................. 30