User's Manual

WizFi360 User Manual
Commands
AT+CIPDNS_DEF?
AT+CIPDNS_DEF=<enable>[,<DNS
server0>ˈ<DNS server1>]
Response
[+CIPDNS_DEF:<DNS server0>]
[+CIPDNS_DEF:<DNS server1>]
OK
OK
Parameters
• <enable>˖
▶ 0˖disable to use a user-defined DNS server;
▶ 1˖enable to use a user-defined DNS server.
• <DNSserver0>˖optional parameter indicating the first DNS server;
• <DNSserver1>˖optional parameter indicating the second DNS serve.
Note
• For command: AT+CIPDNS_DEF=0 (disable to use user-defined DNS servers),
"208.67.222.222" will be used as DNS server by default. And the DNS server
may change according to the configuration of the router which the chip
connected to.
• For command: AT+CIPDNS_DEF=1 (enable to use user-defined DNS servers,
but the <DNS server> parameters are not set), servers "208.67.222.222" will
be used as DNS server by default.
Saved in the Flash
Commands
AT+CIPDNS_CUR?
AT+CIPDNS_CUR=<enable>[,<DNS
server0>ˈ<DNS server1>]
Response
[+CIPDNS_CUR:<DNS server0>]
[+CIPDNS_CUR:<DNS server1>]
OK
OK
Parameters
• <enable>˖
▶ 0˖disable to use user-defined DNS servers;
▶ 1˖enable to use user-defined DNS servers
• <DNSserver0>˖optional parameter indicating the first DNS server;
• <DNSserver1>˖optional parameter indicating the second DNS serve
Note
• For command: AT+CIPDNS_CUR=0 (disable to use user-defined DNS servers),
"208.67.222.222" will be used as DNS server by default. And the DNS server
may change according to the configuration of the router which the chip
connected to.
• For command: AT+CIPDNS_CUR=1 (enable to use user-defined DNS servers,
but the <DNS server> parameters are not set), servers "208.67.222.222" will
be used as DNS server by default.
Example
AT+C IPDNS _CUR =1ˈ"8.8.8.8"
10.3.2.18. AT+CIPDNS_DEF Sets User-defined DNS Servers; Configuration
Saved in the Flash