User's Manual

WizFi360 User Manual
10.3 TCP/IP-Related AT Commands
10.3.1 Overview
No. Command Description
1 AT+CIPDOMAIN DNS function
2 AT+CIPSTART Establishes TCP connection, UDP transmission
3 AT+CIPSEND Sends data
4 AT+CIPSENDEX Sends data
5 AT+CIPCLOSE Closes TCP/UDP connection
6 AT+CIFSR Gets the local IP address
7 AT+CIPMUX Configures the multiple connections mode
8 AT+CIPSERVER Deletes/Creates a TCP server
9 AT+CIPMODE Configures the transmission mode
10 AT+CIPSTO Sets timeout when WizFi360 runs as TCP server
11 AT+PING Ping
12 AT+CIUPDATE Upgrades the software through network
13 AT+CIPDINFO Shows remote IP and remote port with +IPD
14 +IPD receives network data
15 AT+CIPSNTPCFG Configures the time domain and SNTP server.
16 AT+CIPSNTPTIME Queries the SNTP time.
17 AT+CIPDNS_CUR Sets user-defined DNS servers; configuration not saved in
the flash
18 AT+CIPDNS_DEF Sets user-defined DNS servers; configuration saved in the
flash
10.3.2 Commands
10.3.2.1. AT+CIPDOMAIN DNS Function
Command AT+CIPDOMAIN=<domain name>